removing the 7-in-1 memory card reader or the diskette (floppy) drive

The PC has a removable drive cage that holds the 7-In-1 memory card reader and the diskette drive. You can remove and replace either of these drives if they are included with your model.

To ensure that the drive fits properly into the PC, be sure to purchase the replacement diskette drive from HP. Refer to the Warranty & Support Guide for contact information.

To remove the 7-In-1 memory card reader drive or the diskette drive:

1Remove the side panel that has thumbscrews. See page 99.

2Gently lay the PC on its side.

3Make a note of each cable attached to the drive you want to replace.

4Push down on the drive cage release tab (E).

5Hold the release tab down as you pull the cage toward the back of the chassis, and then lift it out (F). Removing the drive cage provides more space to remove the cables.

F

E

6Remove the cables attached to the back of the drives in the drive cage.

upgrading and servicing the pc (1) 105