10Place the second hard drive inside the chassis and align it to the screw holes

(P) on the front of the chassis. Use four regular 6/32 x ¼” (equivalent length is 0.64 cm) screws (not included with your PC) to secure the hard drive to the front of the PC. Insert the screws from the front of the PC chassis into the drive. Tighten the screws.

11Connect the end of the IDE cable labeled CPU to the motherboard.

12Place the hard drive bracket over the new second hard drive, align the four tabs to the holes on the front of the chassis, and then slide it toward the bottom of the chassis until it snaps into place (Q).

R

Q

112user’s guide