13Attach the two screws to the hard drive bracket (R).

14Replace the preinstalled hard drive. See page 109.

15Replace the front panel. See page 101.

16Replace the side panel. See page 99.

removing a second hard drive

1Remove the side panel. See page 99.

2Remove the front panel. See page 100.

3Gently lay the PC on its side.

4See “removing the preinstalled hard drive” on page 107.

NOTE: You do not need to remove the preinstalled hard drive from the bracket when installing a second hard drive.

5Remove the two screws on the hard drive bracket (N).

N

O

P

6Slide the bracket away from the bottom of the chassis (O), and then pull it up and out of the chassis.

7Remove the four screws on the front of the chassis to release the hard drive from the front of the chassis (P). Pull the hard drive out of the chassis.

8Make a note of each cable attached to the second hard drive before removing the cables. Remove the IDE and power cables from the back of the second hard drive.

upgrading and servicing the pc (1) 113