English
Installation
Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap.Œ
2.Ensure that the power cord and signal cable are securely connected.
3.Turn on the lamp by pressing “Power” button on the control panel. •
The startup screen will display for 20 seconds and the Power/Standby indicator will flash green.
When the startup screen disappear, the Power/Standby indicator will light up green.
4.Turn on your source (computer, notebook, video player , etc.). The projector will detect your source automatically.
vIf the screen displays “No Signal” , please make sure the signal cables are securely connected.
vIf you connect multiple sources at the same time, use the “Source” button on the Remote Control or Panel Control to switch.
3 Power
vTurn on the projector first and then the computer.
1
Lens cap
10
