English
Installation
Powering Off the Projector
1.Press the “Power” button to turn off the projector lamp.
2.After pressing the “Power” button, you will see a message “Power off the lamp?” on the
Otherwise the message will disappear after 5 seconds.
3.Power/Standby indicator flashes orange for about 40 seconds. The projector will automatically shut itself down.
If you want to turn on the projector again, you must press the “Power” button within 40 seconds of the indicator flashing.
4.Disconnect the power cord from the electrical outlet and the projector.
5.Do not turn on the projector immediately following a power off procedure.
Warning Indicator
vWhen the Warning indicator light up red, it indicates the projector has been overheated. The projector will automatically shut itself down.
vWhen the Warning indicator flashes red (0.5 second intervals), it indicates problem with the lamp, turn off the projector and disconnect the power cord from the electrical outlet, and you should contact your local dealer or our service center.
vWhen the Warning indicator flashes red (1 second intervals), it indicates internal problem, stop using the projector and disconnect the power cord from the electrical outlet, and you should contact your local dealer or our service center.
vWhen the Warning indicator flashes orange, it indicates high- speed cooling in progress. This is not an abnormal condition, and you can continue using the projector for your presentation.
11
