![](/images/new-backgrounds/1195621/19562135x1.webp)
18
English
Appendices
Troubleshooting
If you are experiencing trouble with the projection display, refer to the following. If the problem persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
4Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.
4If the projector is plugged into a power strip, make sure the power strip is turned on.
4Ensure the pins of connectors are not crooked or broken.
4Check if the projection lamp has been securely installed. Please refer to the “Changing the lamp” section.
4Make sure you have removed the lens cap and the projector is switched on.
Problem: Partial, scrolling or incorrectly displayed image.
4Press the “Resync”button on the Remote Control.
4If you are using a PC:
If the resolution of your computer is higher than 800 x 600. Follow the steps outlined below to reset the resolution.
For Windows 3.x:
1.In the Windows Program Manager, click the “Windows Setup” icon in the Main group.
2.Verify that your display resolution setting is less than or equal to 800x 600.
For Windows 95:
1.Open “My Computer” icon, the “Control Panel” folder, and then double click the “Display” icon.
2.Select the “Setting” tab.
3.In the “Desktop Area” you will find the resolution setting. Verify that the resolution setting is less than or equal to 800 x 600 resolution.
If the projection display is still not projecting the whole image, you will need to also change the monitor display you are using. Refer to the following steps.