Optoma Technology LR4 Removing the Wireless USB Receiver, Installing the Wireless USB Receiver

1.5.1.1Powering LR4

To switch LR4 on or off, press and hold the Power/Mode button for two seconds, at the same time, the LCD illuminates for 3 seconds. The LR4 will automatically turn off after 30-minutes standby.

1.5.2 Removing the Wireless USB Receiver

Locate the raised edge at the rear-end of the controller module.

Push and slide out the wireless USB receiver.

1.5.3 Installing the Wireless USB Receiver

The wireless USB receiver is used like a regular USB
flash drive. Plug the receiver directly into an available
USB port of your notebook or computer. Windows 2000/
XP/Mac OS 9.0 operating systems and later, the drive is	USB
automatically recognized and installed.
Note: If after installation, the USB receiver does not
respond to the controller, please see “Frequency
Search” on page 14 for how to match the
frequency between controller and receiver.

TAB ALT

Vol

PgUp

E S C /

F

5

P gDn

Vol

LR4 User Manual Chapter 1 Introducing LR4 7