Installation
Powering On/Off the Projector
Powering On the Projector
Note
Turn on the projector first and then select the signal sources.
1.Remove the lens cover.
2.Connect the power cord to the projector.
3.Turn On the connected devices.
4.Ensure the Power LED is flashing and then press the power button to turn On the projector.
The projector's startup logo screen displays and connected devices are detected. If the connected device is a laptop, press the appropriate keys on the computer keyboard to switch the display output to the projector. (Check the user manual of the laptop to determine the appropriate Fn key combination to change display output.)
See Security Settings on page 37 if security lock is enabled.
English
Note
Due to the difference in applications for each country, some regions may have different accessories.
|
|
| 5. If more than one input device is connected, press the |
Note |
| "Source" button sequentially to switch between devices. | |
| For direct source selection, see page 18. | ||
| |||
|
|
|
|
12V OUT is a |
| ||
programmable trigger. |
|
13