User Controls
Setup Signal
Automatic
Enable or disable Automatic to automatically select the appropriate settings.
4Enabled - the projector will automatically select the appropriate settings. 4Disabled - the projector won’t automatically select the appropriate settings.
Frequency
Change the display data frequency to match the frequency of your computer’s graphics card. If you experience a vertical flickering bar, use this function to make an adjustment.
Phase
Phase synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it.
H. Position
4 Press ◄ to move the image left.
4 Press ► to move the image right.
V. Position
4 Press ◄ to move the image down.
4 Press ► to move the image up.
