Optoma Technology TX779P3D manual Setup Network, User Controls, English

User Controls

Setup Network

vUse straight-thru cable when connecting to a hub, switch or a router.

vUse crossover cable for direct PC to projector connection.

Network

Press Enter to apply Network settings. If the connection is successful, the OSD display will show the following dialogue box.

4 Network State—to display network information.

4DHCP:On: Assign an IP address to the projector from the DHCP server automatically.

Off: Assign an IP address manually. 4 IP Address—Select an IP address

4Subnet Mask—Select subnet mask number.

4projector.Gateway—Select the default gateway of the network connected to the 4DNS—Select DNS number.

4Apply—Press Enter to apply the selection.

English 40