Appendices
4
5
1.Switch off the power to the projector by pressing the Power button.
2.Allow the projector to cool down at least 30 minutes.
3.Disconnect the power cord.
4.Open the screw cover.
5.Remove the single screw on the lamp compartment cover.
6.Remove the lamp compartment cover.
7.Remove the three screws from the lamp module. Lift the module handle up.
8.Pull firmly on the module handle to remove the lamp module. To replace the lamp
module, reverse the previous steps. While installing,
align the lamp
module with the connector and ensure it
is
level
to avoid damage.
9.Turn on the projector and do "Lamp Reset" after the lamp module is replaced.
Lamp Reset: See page 47 for more information.
