Optoma Technology TX779P3D Options Advanced, Direct Power On, Signal Power On, Auto Power Off min

User Controls

Options Advanced

Direct Power On

Enable or disable Direct Power On.

4 On— the projector powers on automatically when AC power is supplied. 4 Off— the projector must be powered on as normal.

Signal Power On

Enable or disable Signal Power On.

4On— the projector turns on automatically when an active signal is detected.

4 Off— the projector can be turned on by pressing the "Power" button.

Auto Power Off (min)

Set the Auto Power Off interval. The projector powers off the lamp after 30 minutes of no signal by default. The following warning is displayed 60 seconds before power off.

vWhen Power mode (Standby) is set to Eco, the VGA & Audio pass-through, RS232 and RJ45 will be deactivated when the projector is in standby.

Sleep Timer (min)

Set the Sleep Timer interval. The projector powers off after the specified time period of inactivity (regardless of signal). The following warning is displayed 60 seconds before power off.

Power Mode (Standby)

4 Eco.: Choose “Eco.” to save power dissipation further < 1W.

4 Active: Choose “Active” to return to normal standby and the VGA out port will be enabled.

45 English