User Controls
For example: Use Microsoft Internet Explorer (IE) web browser to control the projector , the IP address is http: // 10.0.50.100.
Step 1: Find an IP Address (10.0.50.100) from LAN function of projector.
Step 2: Select apply and press "Enter" button to submit function or press "menu" key to exit.
Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks , click Change settings of this connection.
Step 4: On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click
"Properties."
Step 5: Click Use the following IP
address, and type in as below:
1)IP address: 10.0.50.XXX
2)Subnet mask: 255.255.0.0
3)Default gateway: 10.0.50.254
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click "LAN Settings."
Step 7: The Local Area Network (LAN)
Setting dialog box appears, In the Proxy Server area, cancel the
Use a proxy server for your LAN check box., then click "OK" button
twice.
Step 8: Open your IE and type in the IP address of 10.0.50.100 in the URL then press "Enter" key. The web page will display as below:
Step 9: Open "Control Panel" to control your projector.
35English
