User Controls
For example: Use Microsoft Internet Explorer (IE) web browser to
control the projector, the IP address is http: // 10.0.50.100.
Step 1: Find an IP Address (10.0.50.100) from LAN function of projector.
10.0.50.100
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to exit.
Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network
Tasks , click Change settings of this connection.
Step 4: On the General tab, under This con- nection uses the following items, click Internet Protocol (TCP/IP), and then click “Properties.”
Step 5: Click Use the following IP address, and type in as below:
1)IP address: 10.0.50.XXX
2)Subnet mask: 255.255.0.0
3)Default gateway: 10.0.50.254
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Settings...”
Step 7: The Local Area Network (LAN) Set- ting dialog box appears, In the Proxy Server area, cancel the Use a proxy server for your LAN check box., then click “OK” button twice.
Engli
44
s
h
