E N G L I S H

How to Replace a Worn Belt

WARNING: Unplug cord from electrical outlet before servicing.

Remove the replacement belt from the storage channel.

Stuffing or Blockage

Under certain conditions it is possible to stuff or block the intake tube and the lower tube assembly. If your vacuum cleaner does not pick up properly, or makes unusual noise and the outer bag does not fluff up or balloon open, follow the following steps:

WARNING: Unplug cord from electrical outlet before servicing.

Remove the door by removing the hold down screw located on side of power head.

Slide the door forward by prying open with a screwdriver or coin.

Remove the belt from the brush roll pulley and the motor drive shaft.

Loop the new belt over the motor drive shaft. Place the opposite end of the belt on the top of the brush pulley and roll the belt around the pulley.

Using your thumb and finger, rotate the belt on the pulley, ensuring that the belt encircles the entire circumference of the pulley.

Replace the door by sliding it into the groove at the bottom of the housing. Replace the hold down screw.

A

➧

Intake Opening

➧

B Intake Opening

Retainer

Spring

C

Fan

Housing

O-ring

D

E

1.Check for blockage at the mouth of the intake opening. See illustration A. If there is blockage, remove it with long-nose pliers, a screwdriver or coat hanger. If you can not reach the blockage, remove base plate. See illustration B.

2.If the blockage is not at the base, remove lower tube. See illustration C. Unhook retainer spring, releasing bottom of bag. Twist lower collar counter clockwise to slide up. Pull tube out of base. Check for blockage. If blockage is in the tube, remove with a coat hanger.

3.If tube is not blocked, look into fan housing. See illus- tration D. Remove debris with long-nose pliers, a screwdriver or coat hanger.

4.To reassemble, check O-ring on tube, and replace if damaged. Vacuum will not operate properly without the tube O-ring. Slide O-ring to approximately 2" from base of tube. Replace tube by first lining up slot at base of tube with inner tab inside fan housing. Then reinsert tube and push down until the tube is seated. Make sure O-ring is in place against fan housing opening. Replace and tighten collar until collar locking tabs are locked in place. See illustration E. Make sure collar is not cross threaded on housing.

6

Page 5 Page 7
Page 6
Image 6
Oreck XL2000HH warranty How to Replace a Worn Belt, Stuffing or Blockage
Page 5 Page 7

XL2000HH specifications

The Oreck XL2000HH is a renowned lightweight vacuum cleaner that has captured the attention of both homeowners and professionals alike, thanks to its effective design and innovative technologies. With its sleek and compact frame, the Oreck XL2000HH weighs around 8 pounds, making it easy to maneuver around the house and ideal for users of all ages.

One of the standout features of the Oreck XL2000HH is its powerful motor, which generates impressive suction. This vacuum is equipped with a 12-inch cleaning path, allowing it to cover larger areas quickly, minimizing the time spent vacuuming. The dual helix roller brush technology enhances its cleaning capabilities by loosening dirt and debris from various floor types, including carpet, hardwood, and tile, making it versatile for different surfaces.

The Oreck XL2000HH excels in reaching those tough spots and corners. Its low-profile design allows it to fit under furniture, ensuring that dust and allergens don't accumulate in neglected areas. For those who are particularly sensitive to allergens, the vacuum features a hypoallergenic inner bag that captures particles as small as 0.3 microns. This filtration system is crucial for improving indoor air quality, especially for allergy sufferers.

Flexibility is another key characteristic of the Oreck XL2000HH. The vacuum has a convenient 40-foot power cord that offers ample reach without the need to frequently change outlets. Additionally, itsAutomatic Floor Adjustment enables the vacuum to seamlessly transition from carpet to bare floors without any manual adjustments needed.

The Oreck XL2000HH is designed with user-friendly features that enhance the overall cleaning experience. The handle is ergonomically designed to reduce strain during extended use, and its simple controls make it straightforward to operate. Another noteworthy point is the vacuum's durability; Oreck is known for producing long-lasting products, and the XL2000HH is no exception.

Moreover, its maintenance is hassle-free thanks to the easy-to-change bags and simple brush-roll access. Users can rely on the quality of Oreck, as this vacuum is backed by a solid warranty, providing peace of mind with every purchase.

In summary, the Oreck XL2000HH stands out not only for its exceptional performance but also for its innovative features and user-friendly design. Its lightweight build, powerful suction, advanced filtration, and versatility make it a highly recommended option for anyone looking to maintain a clean and healthy living environment.
Top Page Image Contents