E N G L I S H

5. Many times blockage occurs

F

due to a full dust bag

 

causing dirt to back down

Connector

the air flow system. When

Deflector

that happens, the blockage

Opening

will be at the top of the

 

system, starting in the area

 

To Adjust or Replace Brush

WARNING: Unplug cord from electrical outlet before servicing.

where the dust bag connects

to the connector assembly.

See illustration F.

NOTE: If the above actions do not correct the problem, contact an ORECK authorized service center or call the commercial

customer service center. US: 1-800-989-3535 CANADA: 1-888-676-7325

IMPORTANT: On plush and new carpets, stuffing may occur due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them.

Using An Oreck Fresh Air® Tab

Your ORECK XL vacuum cleaner has a special FRESH AIR tab pocket. This pocket is located inside the outer bag in the area where the disposable paper bag attaches to the connector assembly. Insert tablet in pocket.

Grounding Instructions

This appliance must be grounded. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electric shock. The cord for this appliance has an equipment-grounding conductor and a

Rotate and match

bearing assemblies

To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond base plate, brush should be adjusted.

Remove the baseplate by removing 5 screws. Then, remove the belt and brush roll from the housing.

Rotate both bearing assemblies at ends of brush roll to show “old” and replace in the holding channels in the housing.

NOTE: The bearing assembly setting marked “OLD” has a smooth side. The one marked “NEW” is notched. When rotating bearings, make sure both bearing assembly settings are the same and face up when replacing the brush roll.

Reassemble the belt and the baseplate and check bristle height above baseplate at each end of brush.

grounding plug. It must only be plugged into an electrical outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is grounded. If not, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 120-volt circuit. It has a grounding plug similar to the example shown. Make sure the appliance is connected to an outlet with the same configuration as the plug. No adapter should be used with this appliance.

Grounding Pin

Grounded Outlet

IMPORTANT: Unless the brush is worn as indicated above, both bearings must be in the “NEW” position. When rotating, both bearings must be in the “OLD” position. Unmatched settings will cause damage to your machine.

If a previous adjustment has already been made and bristle height does not extend above baseplate, a new brush assembly should be ordered.

7

Page 6 Page 8
Page 7
Image 7
Oreck XL2100RH, XL2100HH warranty To Adjust or Replace Brush
Page 6 Page 8

XL2100RH, XL2100HH specifications

The Oreck XL2100HH and XL2100RH are two exceptional models in the Oreck line of uprights that stand out for their performance and innovative features. Designed to provide a deep and thorough clean, these vacuum cleaners are perfect for homeowners seeking a reliable and efficient cleaning solution.

One of the main features of the Oreck XL2100HH model is its lightweight design, which weighs only about 8 pounds. This makes it incredibly easy to maneuver around the house, empowering users to effectively clean carpets, floors, and hard-to-reach areas without straining their back or arms. Similarly, the XL2100RH model follows suit with its low weight and user-friendly handling.

Both models are equipped with Oreck's unique roller brush technology, which ensures that dirt and debris are agitated and lifted from both carpet fibers and hard surfaces. This technology enhances the vacuum's ability to capture even the most stubborn particles, leading to a thorough cleaning experience. The XL2100HH also includes a HEPA filtration system, which captures 99.97% of dust and allergens as small as 0.3 microns, promoting improved indoor air quality for allergy sufferers.

The dual-speed settings featured in the Oreck XL2100HH allow users to choose the optimal suction power for various cleaning tasks. This versatility ensures that delicate surfaces receive the proper care while maintaining the cleaning power needed for carpets and rugs. The XL2100RH includes a similar option, ensuring users have control over their cleaning experience.

Additionally, both models feature a large, easy-to-empty dust bag that holds more dirt than many competitors. This allows for extended cleaning sessions without the need for frequent replacements, making them convenient for larger homes or multiple rooms. The Oreck XL2100 series also boasts a 40-foot power cord, which reduces interruptions during cleaning.

Another appealing characteristic of these models is their durability. Constructed with high-quality materials, the Oreck XL2100HH and XL2100RH are built to withstand the rigors of everyday cleaning tasks, ensuring longevity and reliable performance.

In summary, the Oreck XL2100HH and XL2100RH are robust vacuums that fuse efficiency with ease of use. With their lightweight design, powerful roller brush technology, HEPA filtration capability, and long power cords, these models are ideal for anyone looking to maintain a clean and healthy living environment. Whether tackling carpets or hard floors, these Oreck models deliver on performance and convenience, making them a worthy investment for any household.
Top Page Image Contents