Oregon AWS888 Main Unit Sensor Searching, General Settings Mode, Navigating Through Main Menu

MAIN UNIT SENSOR SEARCHING

Press and hold SEARCH for 2 seconds to manually activate sensor searching. The search icon will blink until the remote signal is found or the search period times out.

Search for channel signal (shown in Temp-Hygro- Pressure mode):

Searching	Sensor	No sensor
for Sensor	found	found

Search for RF clock signal (Shown in Clock-Alarm mode). The selected sensor's channel will be shown in the house display window:

Strong clock and	Weak clock and	No signal
remote signal	remote signal

If no signal is found, check remote unit batteries.

AWS888 English r23 op 9

Black

EN

NOTE The sensor search will automatically start when the main unit is reset.

GENERAL SETTINGS MODE

All settings and display options for this product are accessible from the MAIN MENU.

NAVIGATING THROUGH MAIN MENU

To access

MAIN MENU from any screen press HOME. Press or to highlight a desired option then press ENTER to activate it.

CHANGING SETTINGS

1.Press or to highlight the option you wish to change.

2.Press ENTER to select it.

3.Use the UP or DOWN buttons to change values.

4.Press ENTER confirm changes.

TIP: Pressing the will return you to the previous screen.

9

10/14/03, 4:32 PM