GETTING STARTED
The sensor range is up to 30 meters (100 feet) with no obstructions.
SEARCHING AND DISPLAYING THE UV DATA
To begin searching for remote signals from the UV sensor, press and hold both the UP and DOWN buttons simultaneously for more than 2 seconds. (The lower left corner of the display will toggle between the temperature and the UV reading when a UVI reading from a UV sensor is detected).
NOTE The UV sensor must be activated beforehand. Please refer to the UVR138 user manual for more information.
UV INDEX DISPLAY
UV Index | Level | Icon Display | |||||||
|
|
|
|
|
|
|
|
|
|
0 | ~ 2 | Low |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 | ~ 5 | Medium |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 | ~ 7 | High |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 ~ 10 | Very high |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11 | ~ 25 | Extremely high |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE When the index is calculated to be higher than 25, ““HH”” will blink.
TEMPERATURE READINGS
The temperature display range is from
EN
CHANGING CELSIUS TO FAHRENHEIT
To change Celsius to Fahrenheit:
Simply slide the switch at the back of the clock from °C to °F. (This switch is located inside the battery compartment).
THE RESET HOLE
If the clock behaves strangely or stops responding, insert and press a blunt stylus into the clock’s RESET hole to reset the unit’s settings. (This is located inside the battery compartment).
DEFAULT SETTINGS
All segments of the LCD will be turned on for 3 seconds and a beep sound will be given out. Then it will start RF reception.
•The clock settings are: PM12:00, 1st January 2004, RF enabled, English.
•The clock displays in 24 / 12 hour mode depending on the selection of the radio signal EU/UK.
SAFETY & CARE INSTRUCTIONS
SAFETY PRECAUTIONS
Please observe the following safety precautions when setting up and using this product:
•LCD panel - The LCD panel is made of glass, and may break if the unit is dropped or impacted.
•Heat sources - Keep the product away from heat sources such as radiators, stoves, heaters, and other
CARING FOR YOUR PRODUCT
To ensure you receive the maximum benefit from using this product, please observe the following guidelines:
•Cleaning - Use a damp cloth. Do not use liquid cleaning agents, benzene, thinner, or aerosols.
•Ventilation - The vents and other openings are designed for ventilation, and should not be blocked or covered.
•Blocking the vents can cause the product to overheat, and can damage the unit.
•Repair - Do not attempt to repair the product or modify the circuitry by yourself. Contact the retailer or a qualified repairman if the product requires servicing. Only use replacement parts that are recommended by the manufacturer.
•Do not scratch hard objects against the LCD display as this may cause damage.
5
JM888_EN_R8 | 5 | 9/3/04, 6:33 PM |
