Oregon Scientific 086L004438-013 To search for a sensor, Clock Reception, Reception Signal

EN

To search for a sensor:

Simultaneously, press and hold MEM and CHANNEL for 2 seconds.

NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its date and time automatically once it is within range of:

•DCF-77 generated from Frankfurt, Germany for Central Europe.

•MSF-60 generated from Rugby, England.

The clock collects the radio signals whenever it is within 1500 km (932 miles) of a signal.

NOTE Slide the EU / UK switch to appropriate position for your location. Repeat each time you reset the unit.

NOTE Initial reception takes 2-10 minutes for first set up or when RESET is pressed. Once complete, the reception icon will stop blinking. If the signal is weak, it can take up to 24 hours to get a valid signal.

RECEPTION SIGNAL

Clock signal reception indicator:

STRONG SIGNAL WEAK SIGNAL NO SIGNAL

To enable and force a signal search:

Press and hold for 2 seconds.

To disable the signal reception:

Press and hold for 2 seconds.

SET CLOCK

If the clock signal reception is enabled and a signal is being received the clock does not need to be manually set.

1.Press and hold MODE for 2 seconds.

2.Press or to change the settings.

3.Press MODE to confirm.

4.The settings order is: time zone offset, hour, minute, year, month, day and language.

NOTE The time zone offset can be used to set the clock up to + / - 9 hours from the received clock signal time. If you have disabled the clock signal reception (i.e. manually setting the clock), do not set a value for time zone offset.

NOTE The language options are English (E), German (D), French (F), Italian (I), and Spanish (S).

Press MODE to choose between the clock with seconds and clock with weekday display modes.

6