Chapter 2
Getting Started
The Darth Vader Laptop operates on 3 “AA” size batteries or a 6V AC/DC adaptor (not included).
Battery Installation
1.Make sure the unit is turned off.
2.Open the battery cover at the back of the unit using a coin or a straight blade screwdriver.
3.Insert 3 “AA” size batteries.(Note the correct polarity: +, - ).
4.Replace the cover.
AC/DC Adaptor Connection
Please turn off the unit before plugging in the AC/DC adaptor to prevent damage to the unit. Plug the adaptor into the adaptor jack (center positive type) located on the right hand side of the unit. Plug the adaptor into a wall outlet.
Caution
•Do not mix different types of batteries or old and new batteries together.
•Only use batteries of the same or equivalent type as recommended.
•Remove all batteries when replacing.
•Remove batteries if the unit is not going to be used for long periods of time.
•Do not dispose of batteries in fire.
•Do not recharge
•Rechargeable batteries are to be removed from the toy before being charged.
•Rechargeable batteries are only to be charged under adult supervision.
•Remove exhausted batteries from the toy.
•Do not
Caution
•The unit must not be connected to a power supply greater than 6V.
•Only use the recommended adaptor.
•The adaptor is not a toy.
•Do not
•Toys liable to be cleaned with liquid are to be disconnected from the power source before cleaning.
•Due to AC/DC adaptor connection this product is not suitable for children under 3 years to use without adult supervision.
•Any safety isolating adaptor to be used with the toy should be regularly examined for potential hazard, such as damage to the cable or cord, plug, or enclosure of other parts. In the event of such damage, the toy must not be used until the damage has been properly removed.
