GB
Remote Unit
Similarly, you can choose to either mount the remote unit on a wall or make it stand on a flat surface.
NOTE | It is recommended to place the unit away from direct sunlight, rain, | ||
and snow. |
| ||
|
| ||
Method | Instruction | Diagram | |
Table Stand | The remote unit can be outfitted |
| |
|
| with the RemovableTable Stand |
|
|
| (→ p.6,H.). |
|
Wall | Use no.6 screws with the |
Mount | |
| the remote unit onto the |
| holder (→ p.6,G). |
MAIN UNIT TEMPERATURE READINGS
Once the batteries are installed and the main and remote units are calibrated and set in place, the main unit will start reading temperatures.
10
GB
LCD DISPLAY
A. Remote Temperature
Displays the temperature measured by the remote unit (in either °F or °C).
B. Indoor Temperature
Displays the temperature |
| |
measured by the main unit | F | |
(in either °F or °C). | ||
|
C.Radio Reception Display Shows the status of clock synchronization with the U.S. Atomic Clock.
D.Kinetic Wave Display Shows the receiving status of temperature readings from the remote unit.
E.Current Time
Shows current time (in
F.Current Weekday
Shows the current weekday.
To switch the LCD display s temperature unit between
NOTE | Fahrenheit and Centigrade, press the °F/°C Button. |
|
INDOOR TEMPERATURE READINGS
The main unit also reads the temperature of its own surroundings. It displays this temperature on the second line of the LCD display (→ p.11,B.). This second reading is updated approximately every 78 seconds.
LCD Display Description
Soon after the batteries have been installed, the main unit immediately reads and displays the surrounding temperature on the second line of the LCD screen.
11
EMR898_GB(02/05) | Page | 12/1/03, 10:36 AM Adobe PageMaker 6.5C/PPC |
