Oregon Scientific GA 101 Taking Measurements AS a Guest User, Taking WEIGHT-ONLY Measurements

GB

TAKING MEASUREMENTS AS A GUEST USER

Diagram	Instruction
	1. For users without stored settings, simply step
	on the Monitor while the LCD screen is blank.
	NOTE If “	” is shown, the Monitor is unstable
	while measuring your weight. Make sure to
	remain still and place the Monitor on a flat
	surface. Use the carpet feet if the ground is
	uneven. Step off the Monitor and follow the
	instructions from the beginning.
	NOTE If “	” is shown, you have stepped on
	the Monitor too early. Step off the Monitor and
	follow the instructions from the beginning.
	2. Stand still while the measurement is being
	taken. The Monitor will beep and the Male
	icon will flash.
	NOTE If “	” is shown, the maximum loading
	capacity for the Monitor has been exceeded.
	Step off the Monitor and try again with less
	than 150kg of weight.
	3. Step off the Monitor and select your gender:
	3.1 Press + or - to toggle between genders.
	3.2 Press	to confirm.

4. Enter your current age:

4.1 Press + or - to adjust the value.

4.2 Press to confirm.

5. Enter your height :

5.1 Press + or - to adjust the value.

5.2 Press to confirm.

NOTE To enter your height in feet and inches, switch the Monitor to “lb” or “st-lb”.

6. Your weight, BMI, and Body Fat Index are then displayed.

TAKING WEIGHT-ONLY MEASUREMENTS

The Body Weight Monitor is equipped with a patented STEP-ON mechanism to help you take Body Weight measurement without switching on the Monitor. You do not need to wait for measurements like the majority of scales in the market.

To measure your body weight only, just step on the Monitor then step off after your body weight is shown. Alternatively, you can tap on your User Setting Switch, then step on the Monitor after "0.0" is shown on the display. Remain on the Monitor until your body weight is shown. After a moment, your BMI will also be calculated.

12