Oregon Scientific IB368 Wall Mounting The Speaker Optional, Using The Transmitter Dock Adapter

If batteries run low on power and AC adapter is plugged in:

￿ appears to show speaker is being

operated by AC power. ￿ does not appear.

￿ or appears.

WALL MOUNTING THE SPEAKER (OPTIONAL)

The speaker is equipped with rubber supports to give your unit a stable base while placed on a flat surface.

NOTE Placement of this product on wood surfaces with certain types of finishes, such as clear varnish, may result in damage to the finish. Consult the furniture manufacturer’s care instructions for direction as to the types of objects that may safely be placed on the wood surface. Oregon Scientific shall not be responsible for any damage to wood surfaces from contact with this product.

Fix the location of your speaker against the wall using the supplied allen key, L-shaped wall-mount unit and 4 screws:

1. Position the wall-mount unit’s vertical panel onto the area of the wall where you would like to hang the unit.

2. Secure the 15 mm (0.6 in) screws into the corresponding holes of the vertical panel until it is firmly fixed against the wall.

3.Place the speaker onto the horizontal panel of the wall-mount unit, making sure to align the 2 screw holes of the horizontal panel with those of the speaker.

4.Insert the remaining two 10mm (0.4 in) screws into the aligned holes and secure the speaker onto the horizontal panel. The wall-mount unit and speaker should be securely fixed in place.

USING THE TRANSMITTER DOCK ADAPTER

1.Connect the AC adapter connector into the DC IN 9V / 800mA jack at the back of the transmitter dock.

2.Plug your AC adapter into an electrical socket.

NOTE Always use the supplied AC power adapter that is designed specifically for the transmitter dock only. Using any other AC power adapter may cause the unit to malfunction and increase the risk of fire or injury.

NOTE Should you notice any abnormality in the transmitter dock AC adapter, disconnect it from the electrical socket and transmitter dock immediately and take it to a qualified Oregon Scientific dealer for servicing.

DOCKING THE iPOD

The transmitter dock acts as a docking station for different versions of the iPod:

1.Insert the appropriate docking tray intended specifically for use with your iPod model into the transmitter dock.

TIP View the engraving at the bottom of each tray, which contains an iPod description and / or size of internal hard disk to ensure that you correctly match the appropriate tray for your iPod.

2.Insert the iPod into the docking tray. Make sure to align the docking tray’s connectors with the iPod connection slot.

8