To decrease volume, press
the button once. To continuously decrease volume, press and hold the button down until the desired volume level is
reached.
MUTE
1. To mute the sound of the wireless speaker during playback,press
the button. appears on the LCD.
2. To deactivate the mute function, press the
button again. reappears.
TIP If you increase (or decrease) the volume while the speaker is on mute, the Mute function will deactivate and audio playback can be heard again.
BASS AND TREBLE
Adjusting the wireless speaker’s bass and treble settings allows the device to playback audio with a different range of sound and tonal effects.
ADJUSTING BASS
1.Press the button once during playback or when
speaker is on idle or pause. appears on the LCD.
2.Use the / buttons to increase or decrease the bass. To continuously increase or decrease the
bass, press and hold the / button down until the desired bass level is reached. The volume / bass and treble bar decreases or increases accordingly.
2. Press the button once to exit.
NOTE “Auto quit” activates when idle for more than 10 seconds.
SETTING THE CLOCK
NOTE The clock can only be adjusted by minute increments and not by hour increments, and when the system is powered off.
1.Ensure the speaker is powered off. Press the button. Both hands on the clock will flash and the display’s blue backlight turns on.
2.Use the / buttons to set the time: press the button once to advance the clock by 1 minute
and press the button to turn the clock back by 1 minute. Press and hold the / buttons down to set the time faster.
3.Press the button to confirm the newly set time and exit the clock setting mode. The backlight turns off.
NOTE No other buttons can be pressed while the setting clock function is on. “Auto quit” activates when the function is idle for more than 10 seconds; the last time that was set prior to idling is not saved.
NOTE The clock will show on the LCD regardless of whether your wireless speaker is powered on or off.
3. Press the button again. appears on the LCD.
ADJUSTING TREBLE
1.Use the / buttons to increase or decrease the treble. To continuously increase or decrease the treble, press and hold the / button down until the desired treble level is reached.
11
SYNCHRONIZING WITH THE COMPUTER
Once the iPod is docked into the transmitter dock, the iPod synchronizes with a computer and music (and photos with iPod with color display) files can be transferred from computer to the iPod.
1.Power off the iBall speaker.
2.Plug one end of the Apple iPod Dock Connector cable that is supplied with the iPod to the transmitter dock’s
3.After file transfer is complete, unplug the Dock Connector cable from the iPod and press any button on the iPod to turn on the unit.
4.Operate the iPod and iBall speaker as normal.