TABLE STAND |
| BACK VIEW |
The wall clock can be placed on a table using the table stand.
1
2
E N
KEY FEATURES - NIGHTLIGHT WITH MOTION SENSOR
FRONT VIEW
1
| 6 |
3 | 7 |
8 | |
4 |
|
5 |
|
2
3
4
5
6
7
1. | Wall Mount Hole |
2. | Battery Compartment |
| z Uses 3 x |
3. | Channel 1 / 2 |
| z Slide to select either Channel 1 or Channel 2. |
4. | Code switch |
| z Slide to change the Code. |
5. | Mode - On / Off / Auto |
| z Slide switch to ON - the nightlight will turn on in |
| a dark room. |
| z Slide switch to OFF - the nightlight is turned |
| off . |
1.Rotary Motion Sensor
z Detects motion and activates the nightlight and clock backlight in accordance with the settings used.
z Twist the knob to direct the sensor to the position you want.
2.Light Sensor
z Detects the light intensity of the environment.
3.Light ON
z Press to turn the clock backlight ON for 10 seconds remotely.
4.Power - ON / OFF
z Slide to the appropriate setting to turn the battery or AC power ON or OFF.
| z Slide switch to AUTO - the nightlight will only be |
| activated by motion in a dark room. |
6. | Clock Control - On / Off |
| z Slide switch to ON - when motion is detected, |
| the clock backlight will be activated. |
| z Slide switch to OFF - the clock backlight will not |
| be activated by the motion sensor. |
7. | + Light - Rotary knob |
| z Rotate to adjust the sensitivity of the light |
| sensor. |
8. | Reset button |
| z Press to reset the nightlight. |
5.4.5V Adaptor Socket
6.Light Panel
z When activated the panel will light up.
7.LED Indicator
3