TABLE STAND |
| BACK VIEW |
The clock can be placed on a table using the table stand.
1
2
EN
KEY FEATURES - NIGHTLIGHT WITH MOTION SENSOR
FRONT VIEW
1
| 6 |
3 | 7 |
8 | |
4 |
|
5 |
|
2
3
4
5
6
7
1. | Wall Mount Hole |
2. | Battery Compartment |
| Uses 3 x |
3. | Channel 1 / 2 |
| Slide to select either Channel 1 or Channel 2. |
4. | Code switch |
| Slide to change the Code. |
5. | Mode - On / Off / Auto |
| Slide switch to ON - the nightlight will turn on in |
| a dark room. |
| Slide switch to OFF - the nightlight is turned off. |
| Slide switch to AUTO - the nightlight will only be |
1.Rotary Motion Sensor
Detects motion and activates the nightlight and clock backlight in accordance with the settings used.
Twist the knob to direct the sensor to the position you want.
activated by motion in a dark room. |
6. Clock Control - On / Off |
Slide switch to ON - when motion is detected, |
the clock backlight will be activated. |
Slide switch to OFF - the clock backlight will not |
be activated by the motion sensor. |
2. | Light Sensor | 7. | + Light - Rotary knob | ||
| Detects the light intensity of the environment. |
| Rotate to adjust the sensitivity of the light sensor. | ||
3. | Light ON | 8. | Reset button | ||
| Press to turn the clock backlight ON for 10 |
| Press to reset the nightlight. | ||
|
| seconds remotely. |
|
|
|
4.Power - ON / OFF
Slide to the appropriate setting to turn the battery or AC power ON or OFF.
5.4.5V Adaptor Socket
6.Light Panel
When activated the panel will light up.
7.LED Indicator
3
JMR868A_EN_R6 | 3 | 09/21/2004, 11:08 |
