Oregon Scientific JMR868A Alarm, Clock / Calendar Display, Setting The Clock / Calendar

EN

CLOCK / CALENDAR

CLOCK / CALENDAR DISPLAY

There are 3 types of clock display:

Calendar /	Calendar /	Calendar / Clock /
Clock / Sec	Clock / Day	Offset Time

Press the MODE button to toggle between the 3 types of display.

SETTING THE CLOCK / CALENDAR

Before you can manually set the clock and calendar, you must specify the current time zone you live in and the time format (12- or 24-hour) as follows:

1.Press and hold the MODE button for 2 seconds. The time zone offset hour digits will flash. The default setting of the time zone offset hour is -8, which stands for Pacific Time. To change to other U.S. time zones, select the following:

-7 for Mountain Time -6 for Central Time -5 for Eastern Time

2.Enter the value by pressing the or buttons.

3.Confirm the entry by pressing the MODE button. The 12- or 24-hour display format will flash.

4.Repeat (2) and confirm the entry by pressing the MODE button.

5.Repeat the above procedures to set the hour, minute, year, MM / DD or DD / MM format, month, day, day-of-the-week language and hourly chime (On / Off).

You can select 1 of the 5 following languages:

SYMBOL LANGUAGE

English

German

French

Italian

Spanish

6

HOURLY CHIME

The hourly chime function when set to ON will beep once at the beginning of every hour, and the chime

icon will show on the display.

TEMPERATURE

To choose between ˚C / ˚F, slide the switch up or down to the setting you want.

The display can show indoor temperatures ranging from 23˚F to +122˚F (-5˚C to +50˚C).

ALARM

ALARM DISPLAY

There are 3 types of alarm display:

Press the ALARM button to toggle between the 3 types of display.

Daily Alarm /	Start Time for	Stop Time for
Clock	Backlight	Backlight
	activated by	activated by
	Nightlight	Nightlight

IMPORTANT When you press and hold ALARM for 2 seconds to enter the Setting Mode you need to make sure you are in the correct alarm display (see above for reference).

SETTING THE ALARM

To set the alarm:

1.Press and hold the ALARM button for 2 seconds when the selected alarm is displayed. The hours will flash.

2.Enter the values by pressing or .

3.Confirm the entry by pressing the ALARM button.

4.The minutes will flash.

5.Repeat (2) and (3) to finish the setting. The alarm will be activated automatically and the alarm icon will appear on the display.

JMR868A_EN_R6 6 09/21/2004, 11:08