Clock: | NOTE | The nightlight has a Power ON / OFF switch to | ||||
|
|
|
|
| ||
|
|
|
|
| help conserve power. Use the AC adaptor when using | |
|
|
|
|
| ||
|
|
|
|
| the nightlight for long periods of time. The batteries | |
|
|
|
|
| are a good power source for | |
ABOUT ATOMIC CLOCK RECEPTION
This clock can automatically synchronize the date and time with an official
EN
Nightlight:
NOTE Replace the batteries whenever the low battery
icon 
is displayed. Change all the batteries at the same time - it is dangerous to mix old and new batteries. Protect your environment by taking exhausted batteries to authorized disposal stations.
shows on the clock display when the batteries are low.
The LED indicator on the motion sensor will flash in red when the batteries are low.
AC ADAPTOR
The 4.5V AC adaptor connects to the nightlight as shown below.
5
NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky.
TURNING THE ATOMIC CLOCK RECEPTION ON / OFF
To turn the atomic clock reception on:
Press and hold the clock 
button for 2 seconds.
The atomic clock reception icon will appear and flash on the display to indicate it is searching for the atomic clock signal.
Once batteries have been installed in the clock, the reception icon will flash to indicate it is searching for a signal.
When the reception signal has been received the reception icon will show the signal strength by displaying between 0 and 3 waves:
STRONG | WEAK SIGNAL | NO SIGNAL | |||||||
SIGNAL | |||||||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
To turn the atomic clock reception off:
Press and hold the 
button for 2 seconds.
The atomic clock reception icon will disappear from the display.
JMR868A_EN_R6 | 5 | 09/21/2004, 11:08 |
