![](/images/new-backgrounds/1294951/2949519x1.webp)
When it is time to replace batteries, the
HOW TO USE THE TABLE STAND
OR WALL MOUNTING
The main unit has a removable table stand, which when installed, can support the unit on a flat surface. Or you can remove the stand and mount the unit on a wall using the recessed screw hole.
As for the remote unit, it comes with a
Main unit
Table Stand |
EN
Remote unit
Table Stand |
THE RESET BUTTON
This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values.
GETTING STARTED
Once batteries are in place for the remote units, they will start transmitting temperature readings at
The main unit will also start searching for signals for about a minute once batteries are installed. Upon successful reception, the individual channel temperatures will be displayed on the top line and the indoor temperature on the second line. The main unit will automatically update its readings at about
5
RMR182_EN | 5 | 8/16/04, 2:58 PM |