TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock signals. Press and hold DOWN for 2 seconds. Then, manually set the clock following the "Set Clock" instructions (below).
The signal icon indicates that the Atomic Clock feature is ON. No icon means that it is OFF.
SET CLOCK
You only need to do this if you have disabled the Atomic Clock feature (for example, if you are too far from or cannot receive a signal).
1.Press and hold MODE for 2 seconds. The Clock Area will blink.
2.Select the hour offset
NOTE The language options are (D) German,
(E) English, (F) French, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Calendar and Clock display with Hour Offset, Seconds, or Weekday.
ALARM
This product has 2 alarms: a SingleAlarm and a Weekday Alarm. The Single Alarm can be set to go off at a specific time for a
VIEW ALARM SETTINGS
Press ((.)) to display the Alarm settings you wish to view: Weekday or Single.
SET ALARM
1.Press ((.)) to display the type of Alarm you wish to set: Weekday or Single.
2.Press and hold ((.)) again for 2 seconds. The Alarm settings will blink.
3.Select the hour and minute. Press UP or DOWN to change settings. Press ((.)) to confirm.
ACTIVATE ALARM
Press or to activate or deactivate the Alarm.
indicates that the alarm is deactivated.
STOP ALARM
To stop the alarm from ringing, press ((.)).
9
EN
RMR602A lab test R2 | 9 | 1/17/04, 4:49 PM |