TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock signals. Press and hold ZONE for 2 seconds. Then, manually set the clock following the "Set Clock" instructions (below).
The signal icon indicates that the Atomic Clock feature is ON. No icon means that it is OFF
SET CLOCK
You only need to do this if you have disabled the Atomic Clock feature (for example, if you are too far from or cannot receive a signal).
1.Open the battery compartment.
2.Press ZONE repeatedly to display the desired Time Zone: (P) Pacific, (M) Mountain, (C) Central, or
(E) Eastern.
3.Close the battery compartment.
4.Press and hold MODE for 2 seconds. The Clock Area will blink.
5.Select the hour, minute, year, month, day and language. Press UP or DOWN to change the setting. Press MODE to confirm.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds, Clock with Weekday and Calendar.
ALARM
This product is equipped with a
VIEW ALARM SETTINGS
Press ((.)) . The Alarm Time and On/Off status will show in the Clock Area.
SET ALARM
1.Press ((.)).
2.Press and hold ((.)) again for 2 seconds. The Alarm settings will blink.
3.Select the hour and minute. Press UP or DOWN to change settings. Press ((.)) to confirm.
EN
NOTE The language options are (E) English,
(F) French, and (S) Spanish.
9
RMR603HGA lab test R2 | 9 | 1/17/04, 4:52 PM |
