Oregon Scientific RMR603HGA Temperature And Humidity, Activate Alarm, Snooze Alarm, Kinetic, wave

EN

ACTIVATE ALARM

Press ((.)) to activate or deactivate the Alarm. shows in the Clock Area when the Alarm is activated.

SNOOZE ALARM

Press SNOOZE/LIGHT to silence the Alarm for 8 minutes.

If no button is pressed, the Alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes.

TEMPERATURE AND HUMIDITY

This product can display the following temperature and humidity information:

•Current, minimum and maximum readings

•Trend line

Data is collected by the remote sensors and displayed every 40 seconds.

SELECT TEMPERATURE UNIT

Slide the °C / °F switch into the desired location. The switch is located in the battery compartment. The setting for the main unit overrides the remote sensor setting.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 3.

The icon shows the selected sensor.

Kinetic-
wave
Icon
Designat-	Indoor	Remote	Remote	Remote
ed		Display	Display	Display
	Display
Display		Channel 1	Channel 2	Channel 3

To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds. To end auto-scan, press CHANNEL or MEM.

10

RMR603HGA lab test R2 10 1/17/04, 4:52 PM