EN
•Slide the PROJECTION switch ON to activate continuous projection. However, this function will not work unless the AC / DC adaptor is used.
•Adjust the FOCUS knob to make the image clearer.
•Manually tilt the projection unit to position the image.
NOTE You can also press the SNOOZE / LIGHT button to project the time and alarm status for 5 seconds.
RESET THE CLOCK
Insert a thin blunt instrument into the hole below RESET to return to the default settings.
The default settings are: |
|
EU Clock Time: | 12.00 |
UK Clock Time: | 12:00 pm |
Date: | 1st January 2005 |
Language: | English |
Time Offset: | +0 |
Alarm Time: | 6.00 AM |
Daily Alarm(s): | Disabled |
EU Display Setting: | 24hr, DD / MM |
UK Display Setting: | 12hr, DD / MM |
8
WARNINGS
This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. Observe the following guidelines:
•Do not clean any part of the product with benzene, thinner or other solvent chemicals – this may cause permanentdamagethatisnotcoveredbytheguarantee. When necessary, clean it with a damp cloth.
•Never immerse the product in water. This can cause electrical shock and damage the product.
•Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
•Do not tamper with the internal components.
•Do not mix new and old batteries or batteries of different types.
•Do not use rechargeable batteries with this product.
•Remove the batteries if storing this product for a long period of time.
•Do not scratch the LCD display.
NOTE The technical specification of this product and contents of this user manual are subject to change without notice. Images not drawn to scale.
RRM326P_EN_output | 8 | 03/09/2005, 14:44 |
