Oregon Scientific WMR200 Manually SET Clock, Pressure, SET Altitude, Accumulated Rainfall

EN

NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.

To enable / disable signal reception:

Press and hold Clock area to enable / disable signal reception. A beep will sound to confirm action.

NOTE For best reception, the base station should be placed on a flat, non-metallic surface near a window in an upper floor of your home. The antenna should be placed away from electrical appliances and not be moved around when searching for a signal.

MANUALLY SET CLOCK

1. Press Clock area to activate.

2.Press SET to toggle between time zone offset, 12/24 hr format, hour, minute, year, day / month, month, day, time zone.

3.Once in desired setting, press UP or DWN to change the settings.

4.Press:

•SET to confirm and continue to next setting OR

•touch panel area (except tool bar) to confirm and exit.

WMR200: Time zone offset sets the clock +/- 23 hours from the received clock signal time.

WMR200A: Select the time zone: (PA) Pacific, (EA) Eastern, (CE) Central or (MO) Mountain.

NOTE The language options are English (E), German (D), French (F), Italian (I), and Spanish (S).

To select clock display mode:

Press clock area repeatedly to toggle between:

•Clock with seconds

•Clock with weekday

•Date with year

•Data logger (please refer to Memory / Data logger section)

PRESSURE

To toggle barometer unit:

1.Press barometer area to toggle between Altitude / current barometer.

2.Press UNIT to select FEET / M or inHg / mmHg / mb / hPA.

SET ALTITUDE

Set the altitude to reflect distance from sea level at your position.

1. Press barometer area to display ALT.

2.Press SET.

3.Press UP / DWN to set the altitude in 10 m (33 ft) increments from -100 m (-328 ft) to 2500 m (8202 ft).

4.Press SET or touch panel area (except tool bar / forecast area) to confirm.

RAINFALL

To select rainfall display mode:

Press rain area to toggle between:

•Rain rate

•Hourly Rainfall

•Accumulated rainfall

•Rainfall recorded in the past 24 hours

Press UNIT to select mm / in.

ACCUMULATED RAINFALL

To display SINCE DATE:

1.Press rain area repeatedly until Accumulated Rainfall display. (Clock area will display the start date / time of rainfall recording).

To reset SINCE DATE:

Press and hold MEM to set current time as start of accumulated rainfall records.

UV

The UV index levels are as follows:

UV INDEX	DANGER LEVEL	ICON
0-2	Low
3-5	Moderate
6-7	High
8-10	Very high
11 and above	Extremely high

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius (US- with a 75% accuracy).

Sunny

Clear night

Partly cloudy

Partly cloudy at night

Cloudy

Rainy

Snowy

TEMPERATURE AND HUMIDITY

To toggle temperature unit:

1.Press Indoor / Outdoor Temperature / Humidity area.

2.Press UNIT to select °C / °F.

To auto-scan between sensors (Outdoor):

1.Press Outdoor Temperature / Humidity area.

2.Press and hold CH to display data for each sensor.

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity auto-scan function:

1.Press and hold CH to activate auto-scan. The temperature and humidity display will scroll from indoor to ch1 through to ch10.

2.Press CH / MEM to stop the auto-scan.

NOTE Channel 1 is used for the outdoor temperature and humidity sensor provided in this package. Additional temperature and humidity sensors can use other channels.

To change channel:

Press CH to change channel.

TEMPERATURE AND HUMIDITY TRENDS

The temperature and humidity trend icons are based on recent sensor readings.

The trend lines are shown next to the temperature and humidity readings. The trend is shown as follows:

RISING STEADY FALLING

HEAT INDEX

Press Indoor / Outdoor Temperature / Humidity area to display the actual temperature felt:

TEMPERATURE	WARNING	MEANING
RANGE
27°C to 32°C	Caution	Possibility of heat exhaustion
(80°F to 89°F)
32°C to 40°C	Extreme Caution	Possibility of heat dehydration
(90°F to 104°F)

8