41°C to 54°C | Danger | Heat exhaustion likely | |
(105°F to 129°F) | |||
|
| ||
|
|
| |
54°C to 92°C | Extreme danger | Strong risk of dehydration / sun | |
(130°F to 151°F) | stroke | ||
| |||
|
|
|
NOTE Heat index is only calculated when temperature is 80° F / 27°C or above.
WIND
To select wind display mode:
Press wind area 
to toggle between:
•Gust
•Average
Press UNIT to select unit: knots / kph / mph / m/s.
The wind level is shown by a series of icons:
Lost | Light | Moderate | Strong | Storm | |
sensor | |||||
|
|
|
| ||
|
|
|
|
| |
| >55 mph (>88 | ||||
| km/h) | ||||
|
|
|
|
| |
|
|
|
|
|
MOON PHASE
1.Press clock area 
to activate.
2.Press SET repeatedly to display Year / Calendar date.
3.Press UP / DWN to view moon phase for specific dates.
| New Moon |
| Full Moon |
|
|
|
|
| Waxing Crescent |
| Waning Gibbous |
|
|
|
|
| First quarter |
| Last quarter |
|
|
|
|
| Waxing Gibbous |
| Waning Crescent |
|
|
|
|
BAR CHART
To select chart display mode:
Press bar chart area 
to toggle between these chart displays:
•Barometer
•Rain
•UV
ALARM
Weather alarms are used to alert you of certain weather conditions. Once activated, the alarm will turn off when a certain criterion is met.
Area | Type of alarm |
|
|
|
|
Barometer | Barometer | HI |
|
|
|
Rain | Rain rate | HI |
|
|
|
UV | UV | HI |
|
|
|
Temperature | Current Temperature | HI |
|
|
|
|
| LO |
|
|
|
| Heat Index | HI |
|
|
|
Humidity | Current Humidity | HI |
|
|
|
|
| LO |
|
|
|
| Dew Point | HI |
|
| LO |
|
|
|
Clock | Daily Alarm |
|
|
|
|
Wind | Gust Wind Speed | HI |
|
|
|
| Low Wind Chill | LO |
|
|
|
To set the alarm:
1.Press desired area to activate.
2.Press ALARM to display Time and HI / LO alarm.
3.Press and hold ALARM.
EN
4.Press UP / DWN to set the desired values.
5.Press
•ALARM to confirm and continue to next setting OR.
•touch anywhere on the screen (except tool bar / weather forecast area) to confirm and exit.
To enable / disable alarms:
1.Press desired area to activate.
2.Press ALARM to display set Time and HI / LO alarm.
3.Press ALARM ON/OFF to turn alarm ON / OFF.
“-
NOTE Clock alarm sound is different from weather alarms to allow for easy differentiation by user.
To silence any alarm: Press anywhere on the screen.
NOTE 
will continue flashing, despite silenced alarm, for at least 2 minutes or until condition ceases.
NOTE When alarm is on, the channel of triggered alarm will be displayed.
MEMORY
MAX / MIN RECORDS
Area | Type of Memory |
|
|
|
|
Temperature | Current Temperature | MAX |
|
|
|
|
| MIN |
|
|
|
| Heat Index | MAX |
|
|
|
|
| MIN |
|
|
|
Humidity | Current Humidity | MAX |
|
| MIN |
|
|
|
| Dew Point | MAX |
|
|
|
|
| MIN |
|
|
|
Wind | Gust Wind Speed | MAX |
|
|
|
| Wind Chill | MIN |
|
|
|
To view MAX / MIN records:
1.Press desired area to activate.
2.Press MEM to toggle between MIN / MAX recorded values.
To clear individual area records:
1.Press desired area to activate.
2.Press and hold MEM.
3.Delete process is complete when display shows current reading.
HOURLY RECORDS
Display | Hourly readings of up to |
|
|
Barometer | 24 hours back |
Hourly Rainfall | 24 hours back |
|
|
UV | 10 hours back |
|
|
To view hourly records:
1.Press desired area to activate.
2.Press UP / DWN to view current (0) / hourly reading.
When MAX / MIN reading is displayed, the corresponding timestamp will be
displayed in the clock area 
.
DATA LOGGER
To set DATA LOGGER:
1.Press clock area 
until DATA LOGGER mode is displayed.
2.Press SET.
3.Press UP / DWN to select frequency of data recording (1 / 2 / 5 / 10 /15).
4.Press SET.
5.Number of days memory will allow for records will be displayed.
Frequency in minutes | No. of days available for data logging with Memory | |
available* | ||
| ||
|
| |
1 | 29 | |
|
| |
2 | 58 | |
|
| |
5 | 145 | |
|
| |
10 | 291 | |
15 | 436 | |
|
|
*based only on all provided sensors in this package being used, and after all memory has been cleared.
9
