Oregon Scientific WMS802 user manual Product Overview, Front View, Back View, AC adapter hole

EN

NOTE Indoor temperature is measured by the product’s internal sensors.

NOTE After the unit is turned on, it will usually take between 4 and 15 minutes to acquire the MSN Direct signal and obtain weather information, depending on the strength of the signal. If the weather is not displayed within 15 minutes, please ensure the antenna chord

is fully extended, and either reposition the antenna or move the unit to another location with better reception.

Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about.

PRODUCT OVERVIEW

FRONT VIEW

1

3

2

4

1.SNOOZE: Activate 8-minute snooze or backlight

2. / : Increase / decrease setting; enable / disable alarm

3.MODE: Change clock settings and clock / sunrise / sunset display

4.ALARM: View alarm status; set alarm

BACK VIEW

3

1

4

2

1.RESET: Resets unit to default settings

2.AC adapter hole

3.°C / °F: Selects temperature unit

4.Battery compartment

2

WMS802_EN_R4.indd 4

2006.12.5 6:56:28 PM