Operation
If you want to talk to the caller:
1.Pick up the handset or press 
button to answer the call.
2.At the end of the call, return the handset to the cradle or press 
.
Redial function
The last number dialled will be saved in the telephone automatically. To use the redial facility, proceed as follows:
1.Lift the handset or press 
button .
2.Press the REDIAL button. The last saved redial number will now be dialled.
Pause
If needed for phone banking or behind a PBX system, you can insert a 3.6 second pause while dialing or storing a number into MEM. Press REDIAL button at the desired point in number to insert a pause.
Recall and call waiting
Press the Recall button followed by the extension number to transfer calls when connected to a PBX (TBR only).
Access to additional network services can be gained by using the Recall button, * and # keys. Contact your network operator for more information.
The recall button timing can be switched between either 100ms (AUS) / 600ms (NZ), using the Recall switch located on the rear side of the handset.
To Turn on Telstra call waiting (Australia)
You can use the recall button to answer a second call while you are on the phone. However this service will need to be turned on. For example to turn on Telstra's Call Waiting service:
1.Lift the handset and wait for dial tone then Press *43#.
2.You will hear the service message and then hang up.
10
