Wall Mounting
Wall Mounting
Desk Mounting
Fit the bracket as shown in the illustration. Insert the brackets three tabs into the matching slots on the bottom of the phone and click into place.
Caution: Before installing or changing the battery, make sure that the telephone is not connected to the telephone network or the mains power.
Wall Mounting
Bracket postion for desk mounting
Made in China
1.Fit the bracket as shown in the illustration. Insert the braqckets three tabs into the matching slots on the bottom of the phone and click into place.
Bracket postion for wall mounting
2.Drill two holes vertically, one above the other, 83mm apart, and leave the screws protruding from the wall by 5mm.
3.Turn around the handset hook (located by the hook switch) by 180 degress, so it will hold the handset in place when the phone is mounted on the wall.
4.Position the mounting holes on the base of the phone over the two protruding screws on the wall plate or on the wall. Gently push the phone flush against the wall plate then slide the phone downwards locking it into place.
5
