Oricom UHF050 manual Receive & Transmit Indicator, Time Out Timer ToT, Duplex Operation

Operation

2.Rotate the Channel button or press Up / Down Select on the Mic to select the desired DCS channel code.

3.Press the CTCSS / DCS button once to return to standby.

Receive & Transmit Indicator

The LED indictor will illuminate green when the unit is receiving a signal, when transmitting it will illuminate red. When in standby the LED is out.

Time Out Timer (ToT)

Australian and New Zealand standards require that if the PTT is pressed for more than 3 minutes the unit must stop transmitting. The UHF050 is set to stop transmitting after 2 minutes and 30 seconds of continous transmitting. After that time the unit will stop transmitting and TOT will appear in the display to indicate that the ToT has activated.

Duplex Operation

General

Your radio has a Repeater Access function to allow use of local Repeater stations (if available in your area). Repeaters are shared radio system installed by interested parties (clubs, local business etc.) that pick transmissions on specific channels and re-transmit (or repeat) the received signal to another channel.

				2
				l
			e
			n			2
		n
	a				3
h					l
C				e
				n
			n
			a
		h
	C

Repeater Station

C
h
a
n
Channel
n
		e
			l
3				2
	2

13