Orion 10DT Before Requesting Service, Power, TV Broadcast Reception, Remote Control

BEFORE REQUESTING SERVICE

If your unit does not work properly check the following before calling a service engineer.

SYMPTOMS	CAUSE	SOLUTION	PAGE
POWER
	The Mains lead is not connected.	Connect Mains lead to AC outlet.	6
	Main power (ON) switch is OFF.	Set it to ON.	6
No power.	The DC car cord is not plugged into the	Connect the DC car cord to the cigarette	6
	cigarette lighter socket.	lighter socket.
	The DC car cord fuse is blown.	Replace fuse.	6
TV BROADCAST RECEPTION
	The Mains lead is disconnected.	Connect the Mains lead to the AC outlet.	6
	Aerial connector is not connected or wires	Check aerial connections or broken wires.	6
No picture, no sound.	are broken.
	Sub Power ( ) button is off.	Press the Sub Power ( ) button.	6
	Possibly station trouble.	Try another channel.	13
	Possibly station trouble.	Try another channel.	13
Sound OK, poor picture.	Aerial connector is not connected or wires	Check aerial connections or broken wires.	6
	are broken.
	Possibly local interference.	Move the aerial away from the source of	17
		interference.
	Possibly station trouble.	Try another channel.	13
Picture OK, poor sound.	Possibly local interference.	Move the aerial away from the source of	17
		interference.
	Volume control set at minimum position.	Increase VOLUME control.	13
	Aerial connector is not connected or wires	Check aerial connections or broken wires.	6
Poor reception.	are broken.
	Possibly station trouble.	Try another channel.	13
	Aerial connector is not connected or wires	Check aerial connections or broken wires.	6
	are broken.
Poor colour or no colour.	Possibly station trouble.	Try another channel.	13
	Possibly local interference.	Move the aerial away from the source of	17
		interference.
	Colour control is not adjusted.	Adjust the colour settings.	15
DVD
The playback picture has	The disc is dirty.	Eject the disc and clean it.	20
		Some times a small amount of picture
occasional distortion.	It is in fast forward or fast reverse playback.		–
		distortion may appear. This is not a malfunction.
	No disc is inserted.	Insert a disc.	23
	An unplayable disc is inserted.	Insert a playable disc (Check the disc type	20
		and colour system).
The unit does not start	The disc is placed upside down.	Place the disc with the playback side down.	23
playback.	The disc is not placed within the guide.	Place the disc correctly inside the guide on	23
		the disc tray.
	The disc is dirty.	Clean the disc.	20
	The parental lock function is set.	Cancel the parental lock function or change	32,33
		the parental lock level.
Playback does not follow the	It is in the mode of repeat playback,	These operations may prevent a proper	–
course of the disc’s program.	memory playback, etc.	progress of the contents.
appears on the screen.	The function is prohibited with the unit or the disc.	–	–
REMOTE CONTROL

Remote control does not work.

It is not aimed at the remote sensor.	Aim it at the remote control sensor.	5
Distance too far or there is too much light in	Operate within 5 metres and reduce the	5
the room.	light of the room.
Obstacle in the path of beam.	Clear the path of the beam.	5
Batteries are weak.	Replace batteries.	5
Polarities of the batteries, + or –, are not	Install batteries correctly.	5
inserted correctly.

36