Precautions | Orion 10DT guide

PRECAUTIONS

Under certain conditions, such as low humidity or walking across wool carpet, you may experience a static discharge when touching the unit. If this happens and it fails to function, follow the procedure below.

1)Un-plug the unit from the AC outlet.

2)It may take two to three hours for the static build up to clear.

3)Re-plug the unit again.

Do not place the unit on or near appliances which may cause electromagnetic interference eg. TV or hi-fi speakers, etc. Doing so may affect operation of unit causing erratic playing or recording, picture or sound distortion, or noise.

Keep the unit away from flower vases, sink etc. Liquids spilled into the unit can cause serious damages. Switch OFF the Power Supply to the unit and consult a qualified service engineer before attempting to use the unit again.

Avoid extreme heat and cold.

The ventilation holes prevent overheating. Do not block or cover these holes. Especially avoid covering the holes with soft materials such as cloth or paper.

When you leave your home for a long period of time, unplug the AC mains lead.

To protect the unit during a thunder storm, unplug the AC mains lead from the wall outlet and disconnect the antenna.

2

Image 4

Orion 10DT instruction manual Precautions

Contents

MODEL10DT Mains Supply Contents Features Precautions Front Location of ControlsRear Remote Control Select Enter Remote Control Indoor Aerial Aerial CONNECTIONS/POWER SourcesExternal Aerial Using an Audio Amplifier Using an AV Amplifier with built-in digital surroundConnection to Other Equipment Rear of unit Input Selection To connect the unit to a VCRFront of unit To connect the TV to a TV Game SELECT/ENTER Language SettingThen press SELECT/ENTER Presetting the Channels Automatic TuningPress SETUP/MENU Press SELECT/ENTER How to tune a station to channel 10 position Manual TuningPress or to select the Manual mode, then press To Change the Channels Before setting After settingExample Changing of channel position from CH2 and CH5 Automatic Power Shut Off TV OperationsOn screen display will disappear after 4 seconds Direct Channel Selection buttons Indicator appears on Screen in AV modeConvenient Functions Or AV2 from Audio/Video Picture Adjustments To adjust the Brightness Press or , then pressPress SETUP/MENU twice to return to normal TV screen Press or to select the Picture mode, then press AV Colour Adjusting Reception of Interference IgnitionIgnition Ghosting Ghosting Snow Teletext Basic operation To call a teletext How to call a specific sub-pageMagnifying Disc Following pages describe the setup/operation in DVD mode PREPARATION/STATUS Display of DiscPreparation Status display of disc Setting Language Press SETUP/MENU in the stop modeOther Selection Menu/Audio/Subtitle Off subtitle Playback Procedure PowerPress OPEN/CLOSE on the unit or the remote con- trol Press OPEN/CLOSE or Special Playback ZOOMING/LOCATING Desired Scene ZoomingLocating Desired Scene Press Jump during play Repeat A-B REPEAT/RANDOM/PROGRAM Playback and Repeat A-BAudio CD To Cancel the Mark Press Marker during Playback or stop modeMarking Desired Scenes Marking the Scenes Changing Soundtrack LANGUAGE/SUBTITLES Changing soundtrack languageSubtitles Turning the Subtitles On and Off Changing ANGLES/TITLE SELECTION/DVD Menu Changing AnglesTitle Selection DVD Menu Setting the aspect ratio of TV screen Status on screen displaySelect Enter Return Dynamic Range Control Press or to select SoundEnter to select DRC Enter to select On or Off Parental Control Setting To Change the Parental Level Or Select Temporary Disabling of Rating Level by DVD Disc Language Code List Before Requesting Service PowerRemote Control TV Broadcast Reception Specification Television 03/08 K Power supply system To use a Household Power SupplyTo use DC Power Aerial Connections Connect as follows Unit turning on Gerät einschalten How to install the batteriesOn-screen language selection Channel preset Automatic tuning Setting Setup language for DVD Playback