Orion 52084 instruction manual Combine Methods, Filter

Set the Screen Stretch Window to Medium (or otherwise manually adjust for best image appearance), and use Save under the File menu to save your image. You can now perform any wanted imaging processing.

Combine Methods

We previously mentioned in “Imaging Deep Sky Objects” that Average is one of the methods to combine your images. There are three other methods that will achieve slightly different results: Sum, Median, and Sigma-Clip. Each of these methods will improve your image by stacking it, but each one combines the images in different ways.

1.Average sums all the pixels and divides by the number of images chosen to combine.

2.Sum adds up all the pixels in the images. This will increase the Max Pixel value and the offset in the Screen Stretch window. If you Sum the image, the file should be saved as a fit in IEEE Float (beyond 16 bits) to preserve all the data in the image.

3.Median takes the middle pixel value from all of the images. The Median mode is useful when some pixels are extremely bright or dark (hot/dark pixels, cosmic ray hits). If Median mode is used, a Normalize option is available. Normalize will remove differences in the image scaling which could interfere with the median processing.

4.Sigma-Clipcombines the best features of Average and Median. Sigma- Clip is the best choice for removing unwanted noise, hot pixels and satel- lite trails. It works like Average but also calculates the standard deviation of the averaged pixel values. The Sigma Factor will determine how many pixels from the standard deviation are discarded. The lower the Sigma Factor, the more pixels are discarded. 0.5 is a good value to start with. A new average is calculated without the discarded pixel. This value is assigned to the corresponding pixel in the output image.

Filter

Filtering an image is an operation that emphasizes certain characteristics of an image while suppressing others. MaxIm DL Essentials supports two kinds of filters: Unsharp Mask and Gaussian Blur. In the Filter window select which one of these filter types you would like to apply.

Unsharp Mask is a method of sharpening or high-pass filtering an image. It amounts to subtracting a low-pass filtered version of an image from itself. The low-pass filtered version is called the mask. The Low-Pass Filter itself can be set to Mild or Strong for different effect. Use Mask Weight to control the strength of the mask applied to the image. The Mask Weight is in percent; the higher the number, the stronger the mask.

Gaussian Blur is a method of blurring an image. It can be used to suppress noise in an image at the expense of sharpness. The Radius setting controls

26