42
7. Specifications
CCD Sensor: Sony® SuperHAD™ ICX413AQ Color
Sensor format: 1.8"
Pixel array: 3032x2016 (6,112,512 total)
Pixel size: 7.8µm x 7.8µm
Exposure range: 0.002 seconds to 9.3 hours
A/D conversion: 16 bit
Binning optional 2x2
Thermoelectric cooling: 30°C (54° F) below ambient temperature, sealed
dry air chamber to prevent CCD icing
Operating Power Range: 8VDC to 13.8VDC
Camera current draw: Approximately 1A (at 12VDC)
USB connection: 2.0 High speed
IR-cut filter: Yes
Optical window: Fully coated with anti-reflection coatings
Weight: 28 oz.
Autoguider capability: Yes
Mounting: 2" nosepiece or T-thread
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Changes of modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.