SPECIFICATIONS
Amplifier Section
| Power Output 4W Stereo (Watts)1 | 50 x 4 |
|
| Power Output 2W Stereo (Watts)2 | 100 x 4 |
|
| Power Output 4W Mono (Watts)3 | 200 x 2 |
|
| Distortion - all channels driven | < 0.1% THD+N |
|
| at rated power (20Hz to 20kHz) |
|
|
|
|
|
|
| Frequency Response | 20Hz to 20kHZ ±0.25dB |
|
|
|
|
|
| Linear Bandwidth | 10Hz to 50kHz ±3dB |
|
|
|
|
|
| > 100dB |
| |
|
|
|
|
| Damping Factor | > 200 |
|
|
|
|
|
| Slew Rate | > 20V per msec |
|
|
|
|
|
| RCA Input Sensitivity | 200mV to 5V |
|
|
|
|
|
| High Level Input Sensitivity | 1V to 10V |
|
|
|
|
|
| Input Impedance | 10kW |
|
|
|
|
|
| Fuse Type | (2) 30 Amp ATC |
|
|
|
|
|
| Dimensions | 15.9" x 10.5" x 2.4" |
|
|
|
|
|
| Weight | 11 lbs |
|
|
|
|
|
| Crossover Section |
|
|
|
|
|
|
| Low Pass Crossover | Continuously Variable |
|
|
| 2nd Order |
|
|
| (12dB per octave) |
|
|
|
|
|
| Low Pass Frequency Range | 20Hz to 3kHz |
|
|
|
|
|
| High Pass Crossover | Continuously Variable |
|
|
| 2nd Order |
|
|
| (12dB per octave) |
|
|
|
|
|
| High Pass Frequency Range | 20Hz to 3kHz |
|
|
|
|
|
| INTELLi Bass | 16dB boost |
|
|
|
|
|
| INTELLi Bass Center Frequency | 45Hz |
|
|
|
|
|
1.All channels driven, continuous 4W load 20Hz to 20kHz, < 0.05% THD, with input voltage at 13.8VDC.
2.All channels driven, continuous 2W load 20Hz to 20kHz, < 0.1% THD, with input voltage at 13.8VDC.
3.All channels driven, continuous 4W load 20Hz to 20kHz, < 0.1% THD, with input voltage at 13.8VDC.
4 | ©2004 Directed Electronics, Inc. |