Speaker Connections

Four Channel Stereo Configuration

●Front and rear channel lowest recommended impedance is 2W stereo.

●Crossover mode, output, and gain configurations are independently adjustable between the front and rear channels.

●Two-channel or four-channel input can be used for this configuration. For source unit fading, use the four-channel input mode.

●Front and rear outputs can be configured for high-pass, low-pass, or full range operation.

Three Channel Stereo/Bridged Configuration

●Front channels are configured for two-channel stereo operation.

●Front channel lowest recommended impedance is 2W stereo.

●Rear channels are configured for a single channel bridged output.

●Rear channel lowest recommended impedance is 4W.

●Crossover mode, output, and gain configurations are independently adjustable between the front and rear channels.

●Two-channel or four-channel input can be used for this configuration. For source unit fading, use the four-channel input mode.

●Front and rear outputs can be configured for high-pass, low-pass, or full range operation.

●Rear outputs are configured for summed bridged operation for subwoofers.

8

©2004 Directed Electronics, Inc.