AMPLIFIER CONTROLS AND CONNECTIONS

1

2

3

4

5

6

7

8

13

12

11

10

9

14

17

16

15

1.Power LED - when lit indicates that the amplifier is on.

2.Front Gain Control - continuously adjusts from 200mV to 5V for full power output.

3.Front High-Level Input Connector - accepts input from head unit's speaker output.

4.Front RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

5.Rear RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

6.Rear High-Level Input Connector - accepts input from head unit's speaker output.

7.4 CH / 2 CH Switch - configures the amplifier for two or four inputs.

8.Rear Gain Control - continuously adjusts from 200mV to 5V for full power output.

9.INTELLI Bass Control - continuously adjusts from 0 to 16dB of boost centered at 45Hz on the rear channels.

10.Rear Frequency Control - continuously adjusts the frequency of the rear crossover.

11.Rear Crossover Switch - controls the type of filter for the onboard active rear crossover. Full does not attenuate any frequencies and is for full range speaker sys- tems. High attenuates low frequencies and is used for mid-range speakers and tweeters. Low attenuates high frequencies and is used for subwoofer speakers.

12.Front Frequency Control - continuously adjusts the frequency of the front crossover.

13.Front Crossover Switch - controls the type of filter for the onboard active rear crossover. Full does not attenuate any frequencies and is for full range speaker sys- tems. High attenuates low frequencies and is used for mid-range speakers and tweeters. Low attenuates high frequencies and is used for subwoofer speakers.

14.REM Remote Turn-On Input - turns on the amplifier when fed 12 V+.

©2004 Directed Electronics, Inc.

5