Manuals / Orion Car Audio / Home Audio / Stereo Amplifier

Orion Car Audio 8002 Amplifier Installation, Choosing Mounting Locations, Passenger Compartment

Models: 8002

1 22
Download 22 pages 20.4 Kb
Page 14
Image 14

AMPLIFIER INSTALLATION

Choosing Mounting Locations

The location of your amplifier will depend on several important issues. Due to the low pro- file size of the Orion amplifiers, there are many possible installation locations that will yield satisfactory amplifier performance. Always mount the amplifier in a place that protects the amplifier from the elements. In addition, mount the amplifier on a stable, flat surface.

NOTE: Mounting amplifiers upside down is not recommended and may cause premature thermal shutdown.

WARNING! Do not mount any amplifier in the engine compartment. Amplifiers are not designed to endure the harsh environment of the exterior elements.

Passenger Compartment

If you are going to mount the amplifier in the passenger compartment, make sure you have adequate room for ventilation. The amplifiers have been designed to make under-seat mounting possible. When mounting your amplifier under a seat or similar area, keep a min- imum of 1" of clearance around the amplifier for adequate cooling.

Trunk Compartment

Mounting your amplifier in the trunk provides excellent performance as long as you do not restrict the airflow around the heatsink of the amplifier. For optimal results, mount the amplifier with as much clearance as possible. This type of mounting will yield the best cool- ing due to the convection effect of the amplifier chassis.

General Precautions and Installation Tips

WARNING! Be careful not to cut or drill into gas tanks, fuel lines, brake lines, hydraulic lines, vacuum lines, or electrical wiring when working on your vehicle.

Disconnect the vehicle's ground wire at the battery before making or breaking connections to the audio system's power supply terminals.

Do not use this amplifier unmounted. Failing to securely mount the amplifier can result in damage or injury, particularly in the event of an accident. An unmounted amplifier becomes a dangerous projectile in the event of a crash. Never mount the amplifier where it might get wet. Mount the amplifier so the wire connections will not be pulled. Route the wires where they will not be scraped, pinched or damaged in any fashion.

The +12V power supply wire must be fused as close as possible to the battery terminal, ide- ally within 18". Use the recommended fuse size or circuit breaker listed in the Power Connections section of this manual.

If you need to replace the fuse plugged into the side of the amplifier, replace the fuse with the same size ATC / MAXI type fuse that came with the amplifier. If you are not sure as to the correct value, refer to the Power Connections section of this manual for details. Using a high- er current fuse may result in damage to the amplifier that is not covered under warranty.

NOTE: Make sure all the equipment in the system is turned off when making or break- ing connections to the input RCA's or speaker terminals. Turn on the system and slowly turn up the volume control only after double checking all wire connections.

©2003 Directed Electronics, Inc.

13

Page 13 Page 15
Page 14
Image 14
Orion Car Audio 8002 manual Amplifier Installation, Choosing Mounting Locations, Passenger Compartment, Trunk Compartment
Page 13 Page 15

8002 specifications

Orion Car Audio 8002 is a high-performance amplifier designed for car audio enthusiasts seeking powerful sound and exceptional clarity. This amplifier is renowned for its impressive output and efficient design, making it a top choice for those looking to enhance their in-car audio experience.

One of the standout features of the Orion 8002 is its robust power output. With a maximum output of 800 watts, this amplifier can easily drive multiple speakers and subwoofers, delivering a rich and immersive sound experience. It operates in a bridgeable configuration, allowing users to combine its channels for even more power, ideal for those who want to support larger, more demanding audio setups.

The Orion 8002 is equipped with advanced technologies that contribute to its superior audio quality. Its MOSFET power supply ensures efficient performance, reducing distortion and allowing for better dynamic range. This translates to clear, crisp highs and deep, resonant lows that bring music to life, making it suitable for a variety of music genres.

One of the key characteristics of the Orion 8002 is its versatile input options. It features both low-level RCA inputs and high-level speaker inputs, making it compatible with various head units and systems. This flexibility allows users to easily integrate the amplifier into their existing car audio system without the need for extensive modifications.

Additionally, the Orion 8002 comes with built-in crossover filters, providing users the ability to tailor the sound output to their specific needs. The adjustable high-pass and low-pass filters ensure that the amplifier can optimize performance according to the specific speakers or subwoofers being used.

The design of the Orion 8002 is not only functional but also stylish. Its sleek chassis is built to withstand the rigors of car environments, with a durable finish that complements any vehicle interior. Its compact size allows for straightforward installation in various locations within the car, ensuring users can find the perfect fit for their setup.

In conclusion, the Orion Car Audio 8002 amplifier combines powerful output, advanced technologies, and flexible features to deliver an outstanding listening experience. Whether upgrading an existing system or building a new one, the Orion 8002 stands out as a strong option for audiophiles seeking quality and performance in their car audio setup.