Orion Car Audio 8002 manual END Panel Layout

END PANEL LAYOUT

1.Power LED - when lit indicates that the amplifier is on.

2.Stereo/Mono Switch - configures the amplifier for one or two inputs.

3.Gain Control - continuously adjusts from 200mV to 5V for full power output.

4.Copy/Gain/Master Switch - determines the output of the RCA outputs.

5.RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

6.RCA Outputs - provides easy connection to additional amplifiers.

7.Low-Pass Crossover Switch - activates 2nd or 4th order low-pass crossover.

8.Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.

9.High-Pass Crossover Switch - activates 2nd order high-pass crossover.

10.High-Pass Frequency Control - adjusts the frequency of the high-pass crossover.

11.INTELLi Q Control - continuously adjusts the "Q" boost of the high-pass crossover from 0 to 10dB of boost.

12.Speaker Connections - allow up to 12-gauge speaker wire.

13.Remote Gain Connector - allows the gain of the amplifier to be controlled remotely.

14.1 MAXI Fuse - protects the amplifier from over current situations.

15.REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.

16.Power Connections - allow up to four-gauge power and ground cables.

©2003 Directed Electronics, Inc. 5