HCCA102 & 104 Vented SPL Enclosure Only.
Note: These SPL enclosures are for dB drag vehicles only!!!!! If music is played through this type of enclosure, the woofer will be damaged! Listed here are starting points, experimentation is the key to success. Use extreme caution, the woofers can be damaged with frequencies below the tuning frequency.
Box Properties |
|
|
|
|
|
— Description — | — Box Parameters — | — Vents — |
| ||
Type: Vented Box | Vb | = | 1.25 cu.ft | No. of Vents | = 1 |
Shape: Prism, Square | V(total) = | 1.507 cu.ft | Vent shape | = rectangle | |
| Fb | = | 57 Hz | Vent ends | = one flush |
| QL | = | 7 | Hv | = 4.5 in. (114 mm) |
| F3 | = | 44.65 Hz | Wv | = 4.5 in. (114 mm) |
| Fill | = | none | Lv | = 9.45 in. (240 mm) |
A
B
Top &
cBottom
b
d
Front
a& Back
e 
h
h
C
c
Sides
g
— External Dimensions — A = 15 in. (381 mm)
B = 15 in. (381 mm)
C = 17.41 in. (442 mm)
— Internal Dimensions — A = 13 in. (330 mm)
B = 13 in. (330 mm)
C = 15.41 in. (391 mm)
— Wall Thickness — Front = 1 in. (25.4 mm) Sides = 1 in. (25.4 mm)
Box Shape – Square Prism 1 Top, 1 Bottom
depth (c) = 17.41 in. (442 mm) width (b) = 15 in. (381 mm) thickness = 1 in. (25.4 mm)
1 Front, 1 Back
height (a) = 13 in. (330 mm) width (d) = 13 in. (330 mm) thickness = 1 in. (25.4 mm)
2 Sides
height (a) = 13 in. (330 mm) depth (c) = 17.41 in. (442 mm) thickness = 1 in. (25.4 mm)
— Driver Mounting —
Mounting: Front
— Vent Parts —
1 Top, 1 Bottom
width (e) = 6 in. (152 mm) length (h) = 9.45 in. (240 mm) thickness = 0.75 in. (19 mm)
2 Sides
height (g) = 4.5 in. (114 mm) length (h) = 9.45 in. (240 mm) thickness = 0.75 in. (19 mm)
© 2008 Directed Electronics. All rights reserved. | 23 |
