Series—One Speaker (dual 2 ohm voice coils)

One dual 2 ohm voice coil woofer with voice coils in connected in series results in a 4 ohm load to the amplifier.

-

2 ohm

+

Figure 2

Figura 2

Abbildung 2

-

2 ohm

+

+

-

1.Connect the woofer in series by connecting the negative (-) of one terminal to the positive (+) terminal of the other coil.

2.Wire the positive (+) terminal of the first coil to the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the second coil to the negative (-) terminal on the amplifier.

6

© 2008 Directed Electronics. All rights reserved.

Page 7
Image 7
Orion Car Audio HCCA152, HCCA122, HCCA154, HCCA102, HCCA104 Series-One Speaker dual 2 ohm voice coils, Figura Abbildung